BSTSM30-02.pdf
BULLETIN OF SERVICE Code Bulletin BSTSM30-02 Title PROCEDURE FOR UPDATING SW V31100025sub9 And V30100025sub9 Application: Model TSM 30 Issue Date: 3 February, 2004 It creates a new process for the update of terminals SST-30, which is done downloading SW version V31100025sub9 And V30100025sub9. For the implementation of this new procedure will be necessary to have the application "Download 6.3," and MMC cards for which they have been sent to each of the versions. The upgrade is divided into two sections. There is a need to keep track of each of these steps in detail to avoid causing damage to the memory of the terminal performed this operation. If not, the terminals will be considered damaged beyond warranty. 1. VERY IMPORTANT: Verify before any operation version of hardware and software: # # # # 9999, # # # # 90 or # 9999 # * too. (It depends on the installed version that works either code) BSTSM30-02 1 / 6 CONFIDENTIAL 03/02/2004 BULLETIN OF SERVICE 2. A) If the hardware version has an A before the number and version of the SW is NOT v 31100025sub0 nor v 31100025sub6: 2. A.1. Download by IrDa, the file: "MigrateBoot_from_TSM30iO_to_TSM30iN.cpt" • Open the application SW Download 6.3. • Introduce a fully charged battery in the phone. • Replace the terminal interface aligned with the IRDA. • Push the box "NewDownload" of the application. • Turn the terminal by pressing the red ignition. • It opens a pull-down menu where you will be prompted to select the file. • Choose the file named "MigrateBoot_from_TSM30i_to_TSM30iN.cpt" • Once the download correctly, a screen with the following message "Download Completed Successfully" 2. A.2. Loading Software. • With the phone off and put a fully charged battery, enter the MMC version 31100025sub9. • Long-press the red button ignition until it begins downloading. • When the download expires appears a square green in the center of the display. • It must make a long pulsation with the star key. • After a few seconds the device will shut off automatically. • Remove the MMC. BSTSM30-02 2 / 6 CONFIDENTIAL 03/02/2004 BULLETIN OF SERVICE 2. A.3. Checking SW and MMC Loader. • Turn the phone using the power key. • Push "#### 9999 "and the key central OK. It should appear: HW revision: 0000A2XX SW version: 31100025 SW revision: 00000009 MMC loader: 01050800 The version and MMC loader in this case would be correct. Click on OK to return to the main screen. 2. A.4. Reset • Push # # * # 9374 Key Central OK • EXPECT TO TURN THE TERMINAL IS AUTOMATICALLY (PRIOR TO REMOVE THE BATTERY) • Remove the battery. THE TERMINAL QUEDARÍA WITH THIS LAST ACTION WILL TO BE COMPLETELY UPDATED SENT TO CUSTOMER. BSTSM30-02 3 / 6 CONFIDENTIAL 03/02/2004 BULLETIN OF SERVICE 2. B) If the version of hardware has a front and a version of SW is the v 31100025sub0, or v 31100025sub6 proceed directly to: 2. B.1. Loading Software. • With the phone off and put a fully charged battery, enter the MMC version 31100025sub9. • Long-press the red button ignition until it begins downloading. • When the download expires appears a square green in the center of the display. • It must make a long pulsation with the star key. • After a few seconds the device will shut off automatically. • Remove the MMC. 2. B.2. Checking SW and MMC Loader. • Turn the phone using the power key. • Push "#### 9999 "at the end by pressing the key central OK. It should appear: HW revision: 0000A2XX SW version: 31100025 SW revision: 00000009 MMC loader: 01050800 The version and MMC loader in this case would be correct. Click on OK to return to the main screen. 2. B.3. Reset • Push # # * # 9374 Key Central OK • EXPECT TO TURN THE TERMINAL IS AUTOMATICALLY (PRIOR TO REMOVE THE BATTERY) • Remove the battery. THE TERMINAL QUEDARÍA WITH THIS LAST ACTION WILL TO BE COMPLETELY UPDATED SENT TO CUSTOMER. BSTSM30-02 4 / 6 CONFIDENTIAL 03/02/2004 BULLETIN OF SERVICE 2. C) If the hardware version does not have an A before the number, whatever the version SW: 2. C.1. Download by IrDa, the file: "MigrateBoot_from_TSM30iO_to_TSM30iN.cpt" • Open the application SW Download 6.3. • Introduce a fully charged battery in the phone. • Replace the terminal interface aligned with the IRDA. • Push the box "NewDownload" of the application. • Turn the terminal by pressing the red ignition. • It opens a pull-down menu where you will be prompted to select the file. • Choose the file named "MigrateBoot_from_TSM30i_to_TSM30iN.cpt" • Once the download correctly, a screen with the following message "Download Completed Successfully" 2. C.2. Loading Software. • With the phone off and put a fully charged battery, enter the MMC version 30100025sub9. • Long-press the red button ignition until it begins downloading. • When the download expires appears a square green in the center of the display. • It must make a long pulsation with the star key. • After a few seconds the device will shut off automatically. • Remove the MMC. 2. C.3. Checking SW and MMC Loader. • Turn the phone using the power key. • Push "#### 9999 "at the end by pressing the key central OK. BSTSM30-02 5 / 6 CONFIDENTIAL 03/02/2004 BULLETIN OF SERVICE It should appear: HW revision: 000002XX SWversion: 30100025 SW revision: 00000009 MMC loader: 01050800 The version and MMC loader in this case would be correct. Click on OK to return to the main screen. 2. C.4. Reset • Push # # * # 9374 Key Central OK • EXPECT TO TURN THE TERMINAL IS AUTOMATICALLY (PRIOR TO REMOVE THE BATTERY) • Remove the battery. THE TERMINAL QUEDARÍA WITH THIS LAST ACTION WILL TO BE COMPLETELY UPDATED SENT TO CUSTOMER. BSTSM30-02 6 / 6 CONFIDENTIAL 03/02/2004